Composite Construction

• Using today's latest technology composites incorporating epoxy by infusion. We vacuum bag carbon fiber, kevlar and e-glass where appropriate. (We are now able to use Aramid fabrics like Kevlar because of the infusion process)

• Substantially lighter in overall weight than alumium or composite floats of same displacement.
  
  
• No corrosion, no leaks, no rivets, easy to use bush repair kit available
  
  
• Six separate compartments, touch any point in any compartment with your hand
  
  
• New high impact carbon fibre front bumper
  

 Accessories/Hardware

• All stainless or anodized aluminum billet cut or extruded fittings

• 5 ½ inch cord 6061 T6 spreader bars and 3inch vertical strut material

• Unique mechanical gear up/down warning system designed to be more reliable than electrical contact systems alone and includes parabolic mirror kit for each wing

• 10 inch nose wheel 4½ inches wide (larger than most) much better for grass or other rough off airport runways main wheels (Grove amphibious) 15 inch tire, 600 X 6 wheels or 500 X 5 15 inch tire
• Water rudders mounted externally (no leaking through aft compartment) heavy anodized aluminum, stainless 'up' springs and simple to rig and maintain includes pulleys/brackets and cable ready to be fitted for your type a/c paddle kit mounted on the right float grease kit also included

 Design/Performance

• Conventional proven airfoil/water foil design. Updated using today's technology in composites
  

• Pump mounted in left float or the a/c to keep electrics away from float storage area's also allows for pump and controls to be used with wheel ski's( a product soon to introduced by Clamar )
  

• With pump in a/c carry fuel in floats with no concern for the mixing of electrics and fuel vapors
  

• Six accessible compartments' main locker is 17 cubic feet on each side at the c of g with a 11 by 21 inch access doors
  

• Flat top complete length with 3M anti-skid material included for the complete length
  

• Grove amphibious wheels and brakes with built in grease fittings, Oildyne pump, high quality aluminum cylinders and a unique newly designed land landing absorption over center rubber backstop system
  

• Carbon fibre keel total length with aluminum 6061 T6 bonded skid rails
  

• 3/4 inch compartment walls (1 ½ inch at spreader bar) making each compartment water proof from the next, highest weight strength ratio of any product good thermal insulation for food or fish storage
  

• Double fluted profile bottoms, sister keelson's full length of the step, smooth, no rivets, very slippery on water or in the air
  

• High strength fibre cleats front and back total float is corrosion free and always looks new
  

• Floats delivered in epoxy primer, painted to your finished colour if you wish (check pricing). Gel coats available but we suggest paint for easier repairs and weight reduction of 5-6 lbs